Skip to main content

UL 508A Certified · Custom Building Automation Panels & Racks

The Smartest Panels in the Building

Precision-engineered, UL 508A and ULC certified, and factory-tested before they leave our panel shop. Spec your custom control panel once, reorder it forever.

Request a Quote
  • UL 508A Certified
  • 48-Hr Burn-In Tested
  • Design Once, Reorder Forever
SpecIQ UL 508A custom control panel, enclosure open showing pre-wired components

Trusted by teams at

  • Coca-Cola
  • Ford
  • FedEx
  • Amazon
  • JLL
  • Georgia Tech
  • Portman Holdings
  • HSBC
  • Exxon Mobil

What We Do

We Build Custom Control Panels So You Don't Have To

SpecIQ is a UL 508A panel shop and custom control panel manufacturer serving the US and Canada. We design, build, and test custom low voltage, high voltage, security, and building automation panels, plus Class 1 Div 1, Class 1 Div 2, and hazardous location panels. From HVAC control panels and BACnet IP networks to fully custom enclosures and rack-mounted systems, every panel ships UL 508A and ULC certified, 48-hour burn-in tested, and ready to install.

Compliance Alert — Did You Know?

Field-Built Control Panels Require UL Certification. Most Don't Have It.

Any control panel built off-site is legally required to carry UL or ULC certification. Most field-built panels skip this step, leaving building owners exposed to code violations and insurance liability. SpecIQ panels ship fully UL 508A and ULC certified. No secondary inspection. No compliance risk.

See If You're at Risk

7 questions. Know where you stand.

  • 1,500+

    Panels Built

  • 50M+

    Sq Ft Served

  • 10+

    Years in Business

  • 100%

    UL 508A Certified

SpecIQ facility — wide shop floor banner

The Smarter Way to Build

Engineered for Certainty

Every SpecIQ panel ships certified, tested, and ready, so you can focus on the job, not the panel.

  • UL 508A & ULC Certified

    Ships fully certified. No secondary inspection required.

  • 48-Hour Burn-In

    Factory acceptance testing (FAT) eliminates DOA surprises on the job site.

  • Design Once, Reorder Forever

    Custom SKUs saved in perpetuity.

  • Free Shipping

    Central US delivery. Conditions apply.

There's a Better Way to Build

Field-Building Is the Norm. It Shouldn't Be.

Most contractors build panels on a bucket because "that's how it's always been done." But field-building creates inconsistency, compliance gaps, and hidden costs.

  • Consistency Across Locations

    Same wiring, same components, same key, whether it's your 1st panel or your 200th.

  • Eliminate Rework

    Factory-built and tested means no surprises on the job site. DOA rate under 1%.

  • Reduce Service Complexity

    One standardized SKU = one parts kit, one training manual, one service protocol.

  • Ships to Standard

    Every panel carries UL 508A and ULC certification and meets IEEE 802.3 network standards, every standard met before it leaves the shop.

  • Faster Deployments

    Stop staffing up to build panels. Receive them ready to hang and wire in.

  • Design Once, Reorder Forever

    Your custom SKU is saved in perpetuity. Same quality. Zero re-engineering.

Technician working closely on a SpecIQ panel

Find Your Solution

Built for How You Work

How It Works

From Concept to Jobsite in 4 Steps

  1. Upload Drawings

    Send shop drawings or describe the project. 1-on-1 consultation.

  2. Design Together

    Custom SKU confirmed before production begins.

  3. Built & Tested

    UL 508A build. 48-hr burn-in. Full FAT testing.

  4. Ship & Install

    Field-ready delivery. Free shipping. Reorder the same SKU forever.

Start Your Project

Proof of Performance

Results You Can Trust

  • 200+

    Fortune 500 Manufacturer

    Standardized BAS panels across 12 facilities.

    “SpecIQ eliminated our panel chaos overnight.”

  • 6-Wk Deploy

    National Distribution Chain

    Million sq ft in under 6 weeks. 50+ panels.

    “Couldn't have staffed this without SpecIQ.”

  • 50% Savings

    Global Property Firm

    Consistent service ops across portfolio.

    “The ROI was immediate.”

FAQ

Control Panel FAQs

Yes. Any control panel assembled off-site is legally required to carry UL certification. Most installers skip this step, creating compliance and insurance risk.
UL 508A is the gold-standard certification for industrial control panels. It confirms panels meet strict safety requirements and eliminates the need for secondary on-site inspections.
Stock BAS panels ship in under 4 weeks. Fully custom panels take 6-8 weeks. Rack-mounted systems vary, text us for a specific timeline.
Yes. Our panels ship UL 508A and ULC certified and meet the Canadian Electrical Code. Text us for international inquiries.
We create a custom SKU for your panel design, saved permanently in our system. Every reorder is identical: same specs, same quality, zero re-engineering.
A secondary inspection is required when panels aren't pre-certified. SpecIQ panels ship UL 508A certified, so no inspector visit is needed at the job site.
Look for the UL label on the inside of the panel. If it's there, the panel was certified at the factory, no further inspection needed. SpecIQ panels are certified once and certified forever. Every single one. See if you're at risk.
When panels connect to IP networks they become part of your IT infrastructure. IEEE 802.3 standards ensure those panels communicate reliably, stay discoverable, and don't introduce security or compatibility issues. SpecIQ panels are built to IEEE 802.3 from the start, not retrofitted after the fact.

Spec It. Build It. Scale It.

Get a custom quote in 48 hours. No obligation.

Request a Quote Text Us: 1-844-773-2471